Smart Busway monitoring solution-솔루션-Jiangsu Acrel Electrical Manufacturing Co., LTD.

제품

문의

Smart Busway monitoring solution

It is necessary to real-time monitor energy consumption and power quality of end load in smart track busway. Data can be uploaded to monitoring system by local touch screen through RS485 and it can realize real-time monitoring of the whole power distribution system.At the same time,it can monitor real-time temperature at the busway connector and plug-in box interface to ensure safe and reliable operation of the busway.

구조

주요 기능

1. AMB100 or AMB110 is usually installed in the busbar start box and plug-in box
2. Measurement:AC or DC busbar voltage,current,harmonics and other parameters.
3. Realize temperature monitoring of the busbar plug interface
4. AMB200 is usually installed at the connector of the dense AC busbar,and can monitor temp. And humidity at the connector.
5. Communication:LoRa or RS485

제품 선택

Name	Pic	Model	Main Function
HMI		ATP010kt	10 inch touch screen Real-time monitoring and display voltage,current,power,energy,power quality,switch status,wave curve,etc. of the busbar monitoring device alarm,communication and other parameters can be configured on the screen. 2 RS485 and 1 Ethernet,and data can uploaded by RS485 or RJ45
AC start box monitoring module		AMB100-A-P1	Installation:DIN Rail 35mm Measurement:3 phase electrical parameters,2DI2DO,8 temp.,1 leakage current,1 temp. and humidity Communication:1 in 1 out type RJ45 interface(Modbus protocol)
AC plug-in box monitoring module		AMB110-A-P1	Installation:DIN Rail 35mm Measurement:3 phase electrical parameters,2DI2DO,4 temp.,1 leakage current,1 temp. and humidity Communication:1 in 1 out type RJ45 interface(Modbus protocol)
DC start box monitoring module		AMB100-D-P1	Installation:DIN Rail 35mm Measurement:1 DC circuit electrical parameters,4DI2DO,8 temp.,1 leakage current,1 temp. and humidity ±12V output to power hall current sensor Communication:1 in 1 out type RJ45 interface(Modbus protocol)
DC plug-in box monitoring module		AMB110-D-P1	Installation:DIN Rail 35mm Measurement:3 DC circuits electrical parameters,4DI2DO,4 temp.,1 leakage current,1 temp. and humidity ±12V output to power hall current sensor Communication:1 in 1 out type RJ45 interface(Modbus protocol)
AC bus connector temp. measurement device		AMB200-LR AMB200-C	Installation: Fixed on the cover of the busbar connection Contact temp. measurement,measure and display temp. of 4 AC busbars Communication:RS485 or LoRa
DC outgoing line hall effect current sensor		AHKC-BS	Current ratio：100A/5V Common Specification: 100A/5V